Allowable spans and resulting point loads are subject to the following conditions:
Pitched Roof Solutions (Flush Mounted Solutions):
Flat Roof Solutions (SolarMount Tilt and SOLARMOUNT-E Tilt):
Limitations of Responsibility: It is the user’s responsibility to ensure that inputs are correct for your specific project. Unirac is not the solar, electrical, or building engineer of record and is not responsible for the solar, electrical, or building design for this project.Building Assumptions
The installer is responsible for procuring the ballast blocks (Concrete Masonry Units – CMU) and verifying the required minimum weight needed for this design. CMU should comply with ASM standard specification for concrete roof pavers designation (C1491 or C90 with an integral water repellant suitable for the climate it is placed. It is recommended that the blocks are inspected periodically for any signs of degradation. If degradation of the block is observed, the block should immediately be replaced. The CMU ballast block should have nominal dimensions of 4”x8”x16”. The actual block dimensions are 3/8” less than the nominal dimensions. Ballast blocks should have a weight as specified for the project in the “Inspection” section of this report.Design Parameters
Conditions listed below are beyond the current capabilities of U-Builder. Site specific engineering is required.
RM10 – Ballasted Flat Roof Systems
SEAOC PV1-2012: Structural Seismic Requirements and Commentary for Rooftop Soar Photovoltaic Arrays
Assumptions for unattached photovoltaic arrays:
RMDT – Ballasted Flat Roof Systems
SEAOC PV1-2012: Structural Seismic Requirements and Commentary for Rooftop Soar Photovoltaic Arrays
Assumptions for unattached photovoltaic arrays:
It is the responsibility of the user of this software to verify that all inputs are applicable to the installation site and in accordance with local building authority requirements. The installer must confirm that the method of roof attachment (components and hardware) and structure can handle the given point loads. Applications that fall outside of the conditions listed above should undergo final design by a licensed professional engineer of responsible charge.
1. Terms and Conditions
1.1.1 All references to “Unirac” shall mean and include its authorized representative(s).
1.1.2. All references to “us”, “our” or “we” shall mean Unirac and its authorized representative(s).
1.1.3 All references to “you” or “your” shall mean the user(s) of the Unirac application.
1.1.4 All references to the “Unirac application” shall mean the software and/or service provided to the user(s) by Unirac.
1.2 General Conditions
By using the Unirac application, you agree to be bound by these Terms and Conditions of Use and any laws and regulations applicable to the Unirac application. You agree that you are responsible for conforming to all local laws. If you do not agree to any of these Terms and Conditions of Use, you are not permitted to use the Unirac application. The information held in the Unirac application is protected by all pertinent copyright and trade mark law. Unirac reserves the right to revise the Terms and Conditions of Use at any time of our choosing. Any changes will be effective as soon as they are posted on the Unirac application or website. The Terms and Conditions of Use remain effective until altered by Unirac and/or your use of the application is concluded, whether via your action or by action taken by Unirac. You can conclude your use of the application at any time by removing the Unirac application from your mobile or tablet device and deleting your account. Unirac may terminate your use of the Unirac application if, in our opinion, you have breached these Terms and Conditions of Use, you have breached any other Unirac policy and/or if continuing to provide the Unirac application is no longer commercially viable.
1.3 Disclaimer/Limitation of Liability
By using the Unirac application, you agree that Unirac will not be held responsible or liable for any loss or damage that may directly or indirectly result through using the Unirac application, inclusive of but not limited to any special, consequential or indirect damages, including without limitation liquidated damages, time-related carrying costs, any loss of profit, loss of goodwill or reputation, loss of data, intangible losses, and physical and tangible loss and/or harm.
1.3.1 Quality of Material
The materials on the Unirac application are provided “as is” with all faults. Unirac makes no warranties, expressed or implied, and hereby disclaims and negates all other warranties, including without limitation, implied warranties or conditions of merchantability, fitness for a particular purpose, non-infringement of intellectual property or other violation of rights. Further, Unirac does not warrant or make any representations concerning the accuracy, likely results, or reliability of the materials on the application or otherwise relating to such materials on any sites linked to this application. Unirac is not a licensed architectural or engineering firm or general contractor. You agree not to rely on the Unirac application to perform any service, work or calculation that is required to be performed hereby irrevocably waive any claim or loss arising from or related to Unirac’s lack of licensure.
1.3.2 Third Party Content
By using the Unirac application you acknowledge that you may be exposed to content that you or other people may find offensive, indecent or objectionable. In such respect, you agree to use the Unirac application at your own risk and discretion. Unirac accepts no liability for any harm or loss, including but not limited to; physical, psychological or financial loss, caused directly or indirectly, from your use of the Unirac application. Unirac takes no responsibility and accepts no liability for behavior, content or material including, but not limited to, comments/posts, links, spam, advertisements or information provided by other users or third parties through/onto the Unirac application that is fraudulent, inappropriate, lewd, misleading, illegal, offensive or is otherwise harmful.
1.3.3 Third Party Links
The Unirac application may contain advertisements and/or links to external websites or software. Such websites and/or software are not under the control of Unirac and different terms and conditions of use and privacy policies may apply. Any links or advertisements to third party sites or software made on or through the Unirac application do not imply any endorsement of the content or service provided by these external websites or software by Unirac. Unirac accepts no liability for the content or services supplied via links or advertisements to external websites and software and Unirac accepts no liability for any loss resultant from the use of external websites or software.
1.3.4 Content Created, Transmitted and Displayed
By using the Unirac application, you agree that you, and you alone, are responsible for any content that you create, transmit or display in the course of using the Unirac application, and, therefore, you bear responsibility (and agree to indemnify, defend and hold Unirac harmless) for any consequences resulting from your distribution of content that you create, transmit or display. We make no representation as to the compatibility of the Unirac application with your hardware or software.
1.3.5 Personal Information
By using the Unirac application, you agree to take all necessary precautions to protect your own personal details and information and the personal details/information of others that you may be privy to, including but not limited to; first name(s), middle name(s), surname(s), alias(es), degree(s), date of birth, email address(es), contact detail(s), contact phone number(s), picture(s), video(s), demographic information, current location(s), future location(s), address(es), postal code(s), bank account detail(s), credit card detail(s), preferences and interests and other information relevant to customer surveys and/or offers. By using the service, you accept full responsibility and liability for any and all information provided by you. Unirac shall not be liable or responsible for any loss, injury or harm caused directly or indirectly, by or from any materials or information made available by you, intentionally or unintentionally, in whatever form, onto or through your use of the Unirac application.
The Service is provided at no charge to Customer provided that Customer agrees that Unirac may (a) add optional services to Customer or its End Users for a fee or (b) offer a premium version of the Service for a fee.
1.5 Acceptable Use
Unirac requires some personal information via our registration module to facilitate your use of the Unirac application. You understand and agree that your registration information will be accurate when you enter it or update it at any time. You agree to use the Unirac application only for the purposes permitted by these Terms and Conditions of Use and only as permitted by all applicable laws and regulations. You also agree that you will only access the Unirac application by the avenues provided by Unirac and not by any automated avenues. You shall also comply with directions provided by Unirac. You agree that you will not intentionally or unintentionally interfere or disrupt the Unirac application including the network servers utilized by Unirac in providing the Unirac application. No license is granted to reproduce, duplicate, sell, trade or resell the application for any purpose. Data rates may apply on your mobile device.
1.6 Service Levels
The Unirac application requires a reliable internet connection for setup and use and is dependent on the quality of the customer's internet connection. The quality of the Unirac application cannot be guaranteed in the event of unforeseen circumstances beyond the control Unirac. These unforeseen circumstances include, but are not limited to, disruptions in service caused by Unirac’s suppliers, disruptions of service caused by Unirac’s suppliers’ suppliers, blackouts, hardware failure/malfunctions, software failure/malfunctions and disruption in services from your internet/data service provider. Unirac reserves the right to suspend services for the purposes of alteration, maintenance or improvement of service. Unirac makes no guarantee that the service will be continuously available, uninterrupted, error-free or defined to a consistent level at all times. Unirac will not be liable for any loss, including but not limited; financial loss, physical loss, general loss, physical harm, liability’s incurred to third parties, or loss of contracts caused directly or indirectly from a loss of service or low quality service levels.
1.7 Emergency Use
Due to the nature of the Unirac application and the affiliated services required to run the Unirac application, the Unirac application is not suitable for use in emergency situations. If the Unirac application is used in the event of an emergency situation, Unirac will not be responsible for any outcome arising from the use of the Unirac application for this or any other purpose.
1.8 Revisions and Errata
The information contained in the Unirac application may exhibit errors including, but not limited, typographical errors, graphical errors or technical errors. Unirac does not guarantee that any of the information or material contained within the Unirac application is accurate, complete or current. Unirac may make changes to the information contained in its application at any time without notice. Unirac does not undertake to update the information.
The Unirac application operates over the Internet and therefore security of the application is not guaranteed by Unirac. Unirac will endeavor to use security measures appropriate to the application but accepts no liability for any loss of confidentiality through the use or access of the Unirac application.
All materials, information, data, text, images, graphics, artwork, software and source code on, used and exhibited by the Unirac application are subject to the copyright of Unirac. All rights are reserved. No part of the Unirac application may be reproduced in any form or by any means without the prior written consent of Unirac. Certain content created by third parties and accessible through the application may be protected by certain Intellectual Property rights of supplying third parties.
1.11 Governing Law
These Terms and Conditions and any dispute arising from or related to these Terms and Conditions are governed by the laws of the State of New Mexico. Any dispute arising from or related to these Terms and Conditions will be brought exclusively in the state and federal courts sitting in Bernalillo County, New Mexico and you hereby irrevocably consent to the personal jurisdiction of such courts and irrevocably waive any defense to such jurisdiction and venue and any argument that such jurisdiction and venue is not a convenient forum.
2.1 Content Created, Transmitted or Displayed by You
All content that is created, transmitted or displayed by you in the course of using the Unirac application is your responsibility. You bear full responsibility and agree to indemnify, defend and hold Unirac harmless for any and all consequences resulting from any content that you create, transmit or display on the Unirac application.
2.2 Registration Information and Other Information
Unirac requires the user to supply personal information to Unirac through its registration module. This information is inclusive but not limited to: first name, middle name, surname, degree, date of birth, e-mail address, demographic information such as postal code, preferences and interests, and other information relevant to customer surveys and/or offers. Reasons for requiring this information include, but are not limited to; internal record keeping, improvement of services and features, periodical dispatch of Unirac related e-mails, use of information for market research purposes, mitigation of automated spamming and for the regulation and control of anti-social and/or illegal behavior. Unirac will make every effort to store this information in a secure environment, however Unirac accepts no liability for the loss of this data or information should it occur. Information identifying individual users will not be provided to third parties without prior consent from the user. Unirac does, however, reserve the right to provide generic user information that does not identify individual users to third parties where and when Unirac deems this course of action appropriate.
© 2021 Unirac, version: 1.15.25